Thumb Screws and Nuts
From £0.29 Online
A large range of thumb screws made from steel, stainless steel and duroplast. All our thumb screws are knurled for extra grip and ergonomically designed for both ease of use and longevity. Many to DIN standard. The thumb screw is designed to be easily tightened and loosened by hand, hence the name thumb screw.
A large range of thumb screws made from steel, stainless steel and duroplast. All our thumb screws are knurled for extra grip and ergonomically designed for both ease of use and longevity. Many to DIN standard. The thumb screw is designed to be easily tightened and loosened by hand, hence the name thumb screw.
Thumb Screws
Thumb screws from Boneham and Turner Ltd come in blacked steel, stainless steel and brass. Thumb screws are available in a shouldered versions known as knurled thumbscrews and full threaded versions. There are varying threaded nuts, from low profile flat knurled nuts to the deeper grip nuts for added grip surface area.
Thumb Screws
Thumb screws from Boneham and Turner Ltd come in blacked steel, stainless steel and brass. Thumb screws are available in a shouldered versions known as knurled thumbscrews and full threaded versions. There are varying threaded nuts, from low profile flat knurled nuts to the deeper grip nuts for added grip surface area.
UK Range
Flat Knurled Nut DIN 467
Flat knurled nuts are a fully turned single piece and are black oxide. They are available from M3 to M12. Specials can be manufactured to order if sufficient quantities are required.
Features:
- Black-oxide Steel
- Tapped Through Hole
Flat Knurled Nut DIN 467 Stainless Steel
Flat knurled nuts are a fully turned single piece made from stainless steel. They are available from M3 to M12. Specials can be manufactured to order if sufficient quantities are required.
Features:
- AISI 303 Stainless Steel
- Tapped Through Hole
Grip Knobs Stainless Steel with Pin
Stainless Steel Grip knobs are Phenolic based Duroplast thumb screws. They feature a knurled grip on the head for extra grip when in use. Available sizes are M4 and M6 with varying pin lengths.
Features:
- Phenolic based (PF) Duroplast.
- Resistant to solvants, oils and greases
- Black glossy finish
- Stainless steel threaded stud, with FLAT END
Grip Knobs With Pin
Grip knobs are Phenolic based Duroplast thumb screws. They feature a knurled grip on the head for extra grip when in use. Available sizes range from M4 to M10 with varying pin lengths.
Features:
- Phenolic based (PF) Duroplast.
- Resistant to solvants, oils and greases
- Black glossy finish
- Zinc plated threaded stud, with FLAT END
Knurled Grip Nuts DIN 6303
Knurled grip nuts are a fully turned single piece made from black oxide steel and provide a large knurled grip surface. They are available from M5 to M12. Specials can be manufactured to order if sufficient quantities are required.
Features:
- Black-oxide Steel
- To DIN 6303
- Tapped Through Hole
Knurled Grip Nuts DIN 6303 Stainless Steel
Knurled grip nuts are a fully turned single piece made from stainless steel and provide a large knurled grip surface. They are available from M5 to M12. Specials can be manufactured to order if sufficient quantities are required.
Features:
- AISI 303 Stainless Steel
- To DIN 6303
- Tapped Through Hole
Knurled Nut DIN 466
Knurled nuts are to DIN 466 and feature a knurled grip, with a tapped through shoulder, and they are turned from steel and black oxide finished. Available nut sizes are M3 to M12.
Features:
- DIN 466
- Turned black-oxide steel
- Hub, with tapped through hole
Knurled Nut Stainless Steel DIN 466
Stainless steel knurled nuts are to DIN 466 and feature a knurled grip, with a tapped through shoulder. They are fully turned from stainless steel. Available stainless nut sizes are M4 to M8. The black oxide components have a broader size range. Specials can be made to order.
Features:
- 303 Stainless Steel
- Tapped through hole
- Knurled grip area
Knurled Thumb Screws DIN 464
Knurled thumb screws feature a turned shoulder and knurled grip head. They are available from M3 to M10 and in various lengths. Specials can be manufactured to order if sufficient quantities are required.
Features:
- Turned Black Oxide Steel
- To DIN 464
- Threaded pin
- Knurled head
Knurled Thumb Screws Stainless Steel DIN 464
Stainless knurled thumb screws feature a turned shoulder and knurled grip head. They are available from M5 to M8 and in various lengths. Specials can be manufactured to order if sufficient quantities are required.
Features:
- AISI 303 Stainless steel.
- To DIN 464
- Threaded Pin, one piece manufactured
- High corrosion resistance
Thumb Screws Stainless Steel DIN 653
Thumb screws feature a knurled grip head and are a fully turned single piece. They are available from M5 to M8 and in various lengths. Specials can be manufactured to order if sufficient quantities are required.
Features:
- Threaded Pin
- High resistance to corrosion
- Hygenic, climatic and environmental Industries
- 316 Stainless can be manufactured on request
Flat Knurled Nut DIN 467
Flat knurled nuts are a fully turned single piece and are black oxide. They are available from M3 to M12. Specials can be manufactured to order if sufficient quantities are required.
Features:
- Black-oxide Steel
- Tapped Through Hole
Flat Knurled Nut DIN 467 Stainless Steel
Flat knurled nuts are a fully turned single piece made from stainless steel. They are available from M3 to M12. Specials can be manufactured to order if sufficient quantities are required.
Features:
- AISI 303 Stainless Steel
- Tapped Through Hole
Grip Knobs Stainless Steel with Pin
Stainless Steel Grip knobs are Phenolic based Duroplast thumb screws. They feature a knurled grip on the head for extra grip when in use. Available sizes are M4 and M6 with varying pin lengths.
Features:
- Phenolic based (PF) Duroplast.
- Resistant to solvants, oils and greases
- Black glossy finish
- Stainless steel threaded stud, with FLAT END
Grip Knobs With Pin
Grip knobs are Phenolic based Duroplast thumb screws. They feature a knurled grip on the head for extra grip when in use. Available sizes range from M4 to M10 with varying pin lengths.
Features:
- Phenolic based (PF) Duroplast.
- Resistant to solvants, oils and greases
- Black glossy finish
- Zinc plated threaded stud, with FLAT END
Knurled Grip Nuts DIN 6303
Knurled grip nuts are a fully turned single piece made from black oxide steel and provide a large knurled grip surface. They are available from M5 to M12. Specials can be manufactured to order if sufficient quantities are required.
Features:
- Black-oxide Steel
- To DIN 6303
- Tapped Through Hole
Knurled Grip Nuts DIN 6303 Stainless Steel
Knurled grip nuts are a fully turned single piece made from stainless steel and provide a large knurled grip surface. They are available from M5 to M12. Specials can be manufactured to order if sufficient quantities are required.
Features:
- AISI 303 Stainless Steel
- To DIN 6303
- Tapped Through Hole
Knurled Nut DIN 466
Knurled nuts are to DIN 466 and feature a knurled grip, with a tapped through shoulder, and they are turned from steel and black oxide finished. Available nut sizes are M3 to M12.
Features:
- DIN 466
- Turned black-oxide steel
- Hub, with tapped through hole
Knurled Nut Stainless Steel DIN 466
Stainless steel knurled nuts are to DIN 466 and feature a knurled grip, with a tapped through shoulder. They are fully turned from stainless steel. Available stainless nut sizes are M4 to M8. The black oxide components have a broader size range. Specials can be made to order.
Features:
- 303 Stainless Steel
- Tapped through hole
- Knurled grip area
Knurled Thumb Screws DIN 464
Knurled thumb screws feature a turned shoulder and knurled grip head. They are available from M3 to M10 and in various lengths. Specials can be manufactured to order if sufficient quantities are required.
Features:
- Turned Black Oxide Steel
- To DIN 464
- Threaded pin
- Knurled head
Knurled Thumb Screws Stainless Steel DIN 464
Stainless knurled thumb screws feature a turned shoulder and knurled grip head. They are available from M5 to M8 and in various lengths. Specials can be manufactured to order if sufficient quantities are required.
Features:
- AISI 303 Stainless steel.
- To DIN 464
- Threaded Pin, one piece manufactured
- High corrosion resistance
Thumb Screws Stainless Steel DIN 653
Thumb screws feature a knurled grip head and are a fully turned single piece. They are available from M5 to M8 and in various lengths. Specials can be manufactured to order if sufficient quantities are required.
Features:
- Threaded Pin
- High resistance to corrosion
- Hygenic, climatic and environmental Industries
- 316 Stainless can be manufactured on request
